DIY French Bistro Chair

DIY a French bistro chair tutorial for an easy transformation without breaking the bank.

Who knew that French bistro chairs were a hot item right now? Not only for French decorating bloggers like myself but all types of design styles.

DIY French Bistro Chair/ ikea chair, wicker and rattan, bamboo look, vintage typewriter, vintage suitcases, french artwork on wall.

I thought about getting some French bistro stools for my kitchen but I didn’t want it to cut the line of sight around the island. I’ve loved them for years and knew a  friend that brought some back from France 20 years ago for her French inspired kitchen.

They can be quite pricey so I thought this might be a good post for someone wanting a bistro chair but finding a cheaper way of getting the same look.

I had this chair for a couple of years and was about to give it away when I why I bought it in the first place, it looks like a French bistro chair without contrasting colours!

Let me show you how I took a plain black chair (and where you can buy it!) and paint it to look identical to a French bistro chair.

And the best part is I’ve kept this chair black and white so you don’t have to paint the black parts!

The bistro chair at a wooden desk with an antique typewriter.

Disclosure: I received compensation to complete this project using FrogTape painter’s tape. All opinions and ideas are my own. To confirm, you can read the little story I share at the end of this post.

Here is the black chair I had – the Almsta rattan chair from Ikea. It was just begging to be a French bistro chair.

A black wicker chair before the transformation.
Affiliate links are added

Supplies:

Directions:

  1. Tape all the parts of the rattan that will remain black with the 1.41 inch FrogTape. You won’t need to paint the parts you cover up, only touch up afterwards. Find the pattern in the rattan seat (I did a quick paintbrush pattern just to visualize it) and tape it up with the .94 inch FrogTape.
Taping parts of the chair with Frog Tape.

I didn’t have the .94 tape when I took these photos. I ended up redoing the seat as the tape needed to be thinner.

The Frog tape on the seat and the back of the chair.

This is the most important part so take your time to cover the wrapped rattan parts with FrogTape.

The chair lying on its side with Frog tape on it.

You won’t need to cover all of it as you can see in my photos. Only the parts that are going to come in contact with your paint brush.

2. Prime the parts that will be painted. Leave the lattice work last.

Using primer on the parts of the chair that do not have tape on it.

3. Paint all the parts that should be the rattan/bamboo part of the chair the beige-y mustard color with the flat round brushes. Paint two coats, drying between coats. It took me a few tries to get that paint colour correct as you can see from the photo below.

4. The lattice part is the trickiest. If you wanted to make this project easier, you could just leave the lattice work black. The only way to paint it is by free-hand. Find each long strip of wicker in the pattern and alternate painting every second one. Make sure to paint the same white one on the back the same as the front. This is where you’ll need the black acrylic craft paint for touch-ups. It’s impossible to not touch the other black pieces.

Painting the lattice on the chair.

5. For the lattice work as every other part, prime once and paint two coats of the creamy white colour. Do all the white at once then after you just need to touch up with the black. You can see that I  messed up a few strips and had to fix them. I had to go back and forth with the white and black a few times before I find the right technique. I was using the large flat brushes initially until I bought the stiffer angled brushes. So be sure to use the flat angled brushes for the lattice work and seat.

Painting the lattice on the seat of the chair.

6. For the seat, the FrogTape does peel a little bit of the rattan paint off so I touched it up with the black craft paint but I had to touch it up anyway with some slip ups. It didn’t peel off anywhere else on the chair and I should add that I’ve had that chair for a few years now so it may have just been regular wear and tear from usage.

The black and white paint on the lattice and the back of the chair.

7. For the last step, be sure to finish with a polyurethane spray. Spray it outdoors or in a well ventilated area.

Spraying the chair so that the paint is sealed.

I’m so happy it turned out!! You just never know when you have an idea if it’s going to actually work.

Up close picture of the black and white lattice on the chair.
The chair in the living room with a small wooden desk behind it with an antique typewriter on top and suitcases underneath.
There is a wooden beaded chandelier above the chair at the desk.
There is a painting behind the typewriter in the living room.

I’ll also say this although I certainly don’t have to. I LOVE FrogTape. It’s the only stuff I use when I’m painting. I painted my concrete patio slab to look like an outdoor rug using FrogTape and it was NOT a sponsored post. When I saw FrogTape at the Haven Conference again this year, I was like DOH! I should have used you guys for my patio post, what I was thinking asI often just do posts without thinking of getting them sponsored. So I just use what works and what I like but I’ve got to start making some money on this little blog of mine and thinking like a business woman.

Also I just wanted to share that with you so you knew I genuinely love the brand and only love sharing with you stuff I love (and actually works!).

DIY French Bistro Chair/ ikea chair, wicker and rattan, bamboo look, vintage typewriter, vintage suitcases, french artwork on wall - So Much Better With Age #frenchdecor #frenchvintage
DIY French bistro chairs before and after pictures.

I hope you feel confident enough now to tackle your own French bistro chair makeover. Put some love into your project and you’ll feel so good you did it all on your own!

DIY French Bistro Chair graphic.

SaveSave

SaveSave

SaveSave

SaveSave

Similar Posts

35 Comments

  1. Wow! You took something that looks very complicated and made is seem simple and easy to do. Love the way it looks with the desk, typewriter, and suit cases! Great job!

  2. Looks fantastic BUT I won’t be attempting that anytime soon! Yikes! You have the patience of a saint! 🤣

      1. But where did you get the framed print? That’s a show stealer in this pic, and I’ve notice you’ve used several of these wooden framed pics throughout. Source?

  3. What brand paint did you use? (Algonquin & mustard)? Im trying to redo 4 bistro chairs that i inherited from a friend.

    1. Hi Betty,
      I’m sorry for taking so long to getting back to you! The brand of paint I used was Fusion Mineral Paint. Good luck!
      Hugs, Jamie

Leave a Reply

Your email address will not be published.